Home Products Distributors Downloads Testimonials Safety About Us Contact Us

Ez Cover Training

Below are downloadable technical papers for the EZcover protective blanket. Click Here to download Acrobat if needed.

Material Specification:
EZcover™ by McTech Group, Inc. is a natural colored cellulose fabric designed to help protect slab-on-grade or other flooring during the construction process. The product is available in standard width 8’ rolls weighing approximately 100 lbs each with each roll covering approximately 400 square feet on application.

Material Specification
Installation Instructions
Safety Policy

Install EZcover™ Protective Covering material as per manufacturer’s written instructions. Place EZcover™ Protective Covering on surface in widest practical width after surface has sufficiently dried or cured. Immediately repair any holes or tears, which may occur during the product application or afterward. Cover the entire interior surface area as needed to aid in prevention of surface damage. If surface contamination occurs, remove the affected area of the blanket and replace with a new portion of the product. Continuous inspection for the purpose of maintaining 100% protective covering contact with surface is recommended after initial application.

Home | EZform System | Ultra Cure | EZcover | Polar Cure | Distributors | Downloads | Safety | About Us | Contact Us

Copyright©2007 McTech Group Inc. All Rights Reserved